TechNational Institute of Standards and Technology

Explainer

Updated

What is a virtual private network?

Key facts

NIST's guides cover IPsec VPNs in SP 800-77 Rev. 1 and SSL VPNs in SP 800-113, and SP 800-113 says many organizations are faced with a choice between the two.

A virtual private network (VPN) is a logical network built on a physical network, such as the Internet, with encryption, tunneling or both, according to the NIST glossary.

The six NIST definitions

The NIST glossary entry gives six definitions of the term. Each one is tied to a source document, and the wording differs from one to the next, so the table lists them by source.

Source named on the glossary pageWhat the definition says
CNSSI 4009-2022A "Protected information system link" that uses tunneling, security controls and endpoint address translation, "giving the impression of a dedicated line"
CNSSI 4009-2022, adapted from IETF RFC 4949A "Restricted-use logical computer network" built from a physical network's resources by encryption, tunneling, or both
NIST SP 1800-21B and NIST SP 800-53 Rev. 5, both citing CNSSI 4009-2022The same wording as the first row
NIST SP 800-113A virtual network built on existing networks that gives "a secure communications mechanism for data and IP information"
NIST SP 800-77 Rev. 1A virtual network built on existing physical networks, for traffic "between networks or between different nodes on the same network"
NIST SP 800-82r3, adapted from IETF RFC 4949A "restricted-use, logical (i.e., artificial or simulated) computer network" built on a "relatively public, physical (i.e., real) network (such as the Internet)"

The definitions share one idea, a virtual network that runs on top of a real network. They differ in detail. One says the network is built "by using encryption and/or by tunneling links", and another says it is often built "by using encryption (located at hosts or gateways)". Both wordings are on the glossary entry.

Two designs NIST describes

Two NIST guides cover two designs. SP 800-77 Rev. 1, Guide to IPsec VPNs covers IPsec, and SP 800-113, Guide to SSL VPNs covers VPNs that users reach through a web browser.

PointIPsec VPN (SP 800-77 Rev. 1)SSL VPN (SP 800-113)
ProtectionA network layer security control, with IPsec configuration usually performed using the Internet Key Exchange (IKE) protocolTraffic between the browser and the SSL VPN device is encrypted with the SSL protocol
What it reachesPrivate communications over IP networks, to mitigate the risk of sending sensitive information across networksSecure remote access to an organization's resources, including web applications, client/server applications and internal networks
Client softwareNot covered in the abstractOften not required, because SSL is included with standard web browsers

What changed and when

The NIST page for SP 800-77 Rev. 1 gives June 2020 as its publication date and lists it as superseding SP 800-77 dated 12/01/2005. The NIST page for SP 800-113 gives July 2008. Both pages label their publication Final.

Cases a reader meets next

  • Linking two networks or two machines on one network. The SP 800-77 Rev. 1 definition covers traffic between networks and also between nodes on the same network, so a VPN is not only a link between two sites.
  • Remote access for users. The SP 800-113 page describes an SSL VPN as a way for users to get "secure remote access to an organization's resources".
  • Choosing a design. SP 800-113 says that in planning a VPN deployment, many organizations face a choice between IPsec and SSL. The table above sets the two designs side by side.
  • The word "dedicated". The first CNSSI definition describes a link that gives "the impression of a dedicated line".

For the basics of the protection a VPN relies on, see what encryption is. For another network control, see what a firewall is.

Have another question?